go to application table

Proven performance in endurance racing many times !

  • You can configure different parts and rotor bell housings to prevent collapse and heat distortion of the rotor judder which reduces heat damage to the hub. In addition it is effective to reduce unsprung weight.
  • You can replace only the outer rotor. The consumable parts of the rotor are now available which can reduce the overall total cost.
  • Because this is a genuine exchange type, it can be easily installed and does not require additional processing. Available as well for a genuine caliper. This of course requires an inspection first.
  • We Increased FC material 20% from conventional content of carbon. Carbon particles entangled in the mesh as it strengthening the bond between molecules! We realize the strength and stability even after repeated expansion / contraction due to heat treatment
  • Pro spec model that greatly improved performance, anti-crack anti-distortion performance Bite of the pad improves due to surface hardness. Compatibility with various pad Brake noise is also suppressed by excellent damping effect. Rust effect is distinguished by special heat-resistant coating.
  • Highest quality disc rotor was born from the experience and technology of DIXCEL

  • Part bolt / nut torque check should be done on a regular basis.
  • Be sure to use sealant when replacing the outer rotor screw, do the torque management at (table below) the specified torque.
  • Since the adoption is of a floating structure, there is a slight gap between the rotor and the outer portion of the bell so there is a possibility of a slight rattling sound.
  • Because of the anti-rust treatment the rotor surface is finished in black. After use the base material of iron will appear once it makes contact with the pad.

  • The value "50" is the normal rotor performance, our products rated at 100.
  • The above figures index shows great pad combination with the performance to last.
  • Compare the higher number for the 2 piece rotor compared to the stock, the performance is improved.
floatting structure

←The floating structure, suppress the heat conduction

Technical Report

Manufacturer Recommended torque value
DIXCEL 9.8 ~ 10.8Nm (1.0 ~ 1.1kgf · m)
ap 14Nm (1.43kgf · m)
Brembo 9.8 ~ 10.8Nm (1.0 ~ 1.1kgf · m)
ALCON 9.8 ~ 10.8Nm (1.0 ~ 1.1kgf · m)
Other Please check with the manufacturer

2 Piece Rotor Assembly


Listing price Including tax
(per side)
FPBS32528M46R (right)
FPBS32528M47L (left)
FP BMW E46 M3$992.05
FSBS32528M48R (right)
FSBS32528M49L (left)
FS BMW E46 M3$992.05
FPBS36030M90R (right)
FPBS36030M91L (left)
FP BMW E90/92 M3$1,135.23
FSBS36030M92R (right)
FSBS36030M93L (left)
FS BMW E90/92 M3$1,135.23
FSBS38034B12R (right)
FSBS38034B13L (left)
FS R35 GT-R MY07$1,378.64
FSBS39033B34R (right)
FSBS39033B35L (left)
FS R35 GT-R MY11$1,378.64
FSBS32032E16R (right)
FSBS32032E17L(left)
FS LANCER EVO V ~ IX BREMBO$771.55
FSBS35032E10R (right)
FSBS35032E11L (left)
FS LANCER EVO X BREMBO$992.05
FSBS32630W72R (right)
FSBS32630W73L (left)
FS GDB / GRB / GVB IMPREZA BREMBO$771.55
FPBS32630W74R (right)
FPBS32630W75L (left)
FP GDB / GRB / GVB IMPREZA BREMBO$771.55
  • Price is for per side. Please note these Rotors are sold Left or Right. Need to specify.

Bell Housing


Listing price Including tax
(per side)
MBL.121E46MBMW E46 M3$419.55
MBL.121E92MBMW E90/92 M3$419.55
MBL.321R35GR35 GT-R MY07$390.91
MBL.321B35G11R35 GT-R MY11$419.55
MBL.341CT9ALANCER EVO V ~ IX BREMBO$390.91
MBL.341CZ4ALANCER EVO X BREMBO$390.91
MBL.361GDBBGDB / GRB / GVB IMPREZA BREMBO$390.91
  • Price is for per side.

Repair Parts


Available in a variety of repair parts for replacement

Listing price Including tax
(per side)
BD-BB-101Bobbin$30.00
BD-BB-607Bolt$30.00
BT-BB-201Bolt$11.45
NT-BB-301Nut$11.45
SP-BB-401Spring$12.86
BB-S901Set bobbin (1p/SET)$40.77
BB-S908Set bobbin (8p/SET)$201.14
BB-S708WESet bobbin (8p/SET) BD-BB-607$201.14
BB-S910Set bobbin (10p/SET)$244.10
BB-S912 Set bobbin (12p/SET) $287.05
  • There are two types of bobbin shape. Please check in advance the shape you bought as the replacement part.

BD-BB-101

BD-BB-607
FPBS32630W74R/75L
FSBS32630W72R/73L
FSBS32032E16R/17L are used in Part 3 or more

Two Piece Rotor

The application table can be found here

2-piece rotor

Precaustions for Mounting

  • Two-piece rotor type is repair of replacement parts for vehicles that are already fitted with the appropriate size of the rotor.
  • If you install a FP to the front, if equipped with a FS, or the PD (HD) FP in the rear, we recommend the installation of SD or FS / HS to the rear.
  • Regardless of the number of slits, we have all adopted the reverse rotation so please note the direction of the slit.
  • Upon installation, please pay attention to the direction of the vane.
  • Always tighten the screw the bolts when attached to the rotor bell.